Siemens expands Convergent Modeling in Parasolid to increase productivity with mixed geometric data formats

Siemens Digital Industries Software has updated Parasolid® software, its open software technology for geometric modeling. The latest release expands on the exciting potential of Convergent Modeling for applications such as generative engineering, 3D printing and reverse engineering with new tools for integrating previously incompatible facet and B-rep data formats within a single modeling session. This enhanced support for mixed models can help drive significant productivity gains by eliminating the need for time-consuming model conversion and allowing users to apply classic design techniques directly to facet models. Read More…

NX Mixed Feature Modeling

New in the December 2020 release of Siemens premier 3D design solution NX, is Mixed Feature Modeling. We have created a demonstration that illustrates some of the exciting new capability now in the latest NX release. Here you will see an example of NX’s true mixed modelling environment which seamlessly brings together mesh and precise geometry. With NX, a designer can design with complete freedom when their design process involves the use of both facet and b-rep geometry. (There’s even a new “Replace Mesh of Face” command!) These updates increase the value of convergent generated geometry, via scan or CAE, for downstream use without reverse engineering.

NX Structure Designer.

Designers have historically faced major challenges around manual effort and a lack of automated tasks in the area of structure design. NX Structure Designer eliminates many challenges by automating tasks that normally require time and intensive manual effort, adding a rich library based on industry standards, and supporting structure reuse. This product helps you reduce design time, get products to market faster, and foster reuse for modular design. By being easy to use, minimizing clicks, and by automating features throughout the process to reduce workload, NX Structure Designer enables NX users to set up structural frames with ease in minutes.

  • Easy-to-use structural frame modeling capability
  • Rapid frame drawing assistant that creates 2D skeletons with minimal clicks
  • 3D member placement that are automatically oriented based on user defined rules
  • Corner treatments that are rules-driven and automatically added
  • Ability to create accurate designs with specialty features such as structural corner stiffeners, end caps, and mounting feet

New in NX December 2020 Release

Algorithmic Modeling. Some designs are easier to describe computationally than to model manually. What if you could create highly customized designs without complex programming? Complex designs previously only possible through advanced programming can now be achieved through an intuitive and logic driven approach in NX. These types of robust features that are ideal for automation and design templates, can be created, stored and reused directly inside NX. This demonstration highlights some of the key capabilities now available in NX.

Cortona3D Technical Publication Solution

Cortona3D Viewer 3.0 for IOS with AR support and reworked UI is now available on App store

Cortona have released a new version of our app for iOS. From now on, Cortona3D Viewer for iOS allows you to upload and store content using iCloud, and view 3D-models in augmented reality on your iPhone or iPad.

Reworked UI based on standard iOS Document Browser: The updated app provides an excellent user experience by incorporating key Apple technologies for a document.

Read More…

DDSPLM February 2021 Events Calendar

What’s New in NX 1953 online training on 6 February 2021 at 11 AM to 01 PM and 25th February 2021 at 11 AM to 01 PM

The Training will cover the New features in NX 1953:
  • Sketching.
  • Design.
  • Assembly.
  • Sheet Metal.
  • NX Visualization and Architectures.

Register now to book your seat…

Launch your product faster with Simcenter FloEFD – Webinar on 12 February 2021 at 3 PM to 4 PM and 19 February 2021 at 03 PM to 04 PM

Extend the power of Siemens NX to optimize product performance and reliability for fluid flow and heat transfer effects.

Webinar Topics:

  • Introduction to Simcenter FloEFD
  • Simulation of electronics cooling (PCB boards)
  • Simcenter FloEFD other applications
  • Simcenter FloEFD case studies

Register now to book your seat…

Digitize NPD to make the product faster 20% to 40% – Webinar on 10th February 2021 at 11 AM to 12 Pm and 20th February 2021 at 3 PM to 4 PM

Smart APQP Solution simply fitted in all processes with reduced time, error/mistakes, and cost.

Webinar Topics:

  • Project Management
  • Document Management
  • To-Do list and follow up with email escalation.
  •  Revision Management
  • Live Project Visualization
  • Project Chat for internal CFT
  • Data Access Control
  • Interlinking FMEA AND CP forms.

Register now to book your seat…

Reduce 40% of the cost and time in forging part development  – Webinar on 11th February at 3 PM to 4 PM and 25 February 2021 at 3 PM to 4 PM.

Come out of Hit and Trial: Make your first trial Okay – Don’t waste your time in hit and trial in shop floor, use QForm software as a virtual hammer/press. Take all your trial on QForm software and if everything is okay then go for die manufacturing and make your first trial okay.

Topics of the Webinar

  • Check the feasibility of your Hammer or Press. Do you want to know forging load and energy required to forge a Product?
  • Do you want to check the technology you are going to use for development of a new product will give a valid output or not?
  • Are you sure about cut weight and section you have calculated is okay for forging?
  • Are you sure that you are utilising the material to a maximum possible yield?
  • Join the webinar to have a detail discussion on these factors.

Register now to book your seat…

NX EasyFill Analysis Webinar on 26 February 2021 at 3 PM to 4:30 PM

EasyFill Analysis provides designers with intuitive injection molding simulations fully embedded in NX. NX EasyFill Analysis helps designers efficiently achieve higher quality and lower costs.

Webinar Topics:

  • Full analysis capabilities (Flow, Packing, Cooling and Warpage)
  • New surface meshing methods – generate mesh with customized mesh size
  • Added gate wizard as part of the select gate function
  • Generate reports of full analysis – including cooling and warpage

Register now to book your seat…


We have released a new version of our app for iOS. From now on, Cortona3D Viewer for iOS allows you to upload and store content using iCloud, and view 3D-models in augmented reality on your iPhone or iPad.

Reworked UI based on standard iOS Document Browser

The updated app provides an excellent user experience by incorporating key Apple technologies for a document…

Read More…


Cortona3D releases RapidAuthor 13.1, a new version of a toolkit for creating interactive technical publications with an advanced formula editor, new features for augmented reality content creation, support for publication structure and new topic types for DITA authoring, and a new RapidAuthor Viewer for offline viewing of publications.

RapidAuthor 13.1 now contains a new…

Read More…

Solid Edge 2021: A Complete Product Development Portfolio

Solid Edge 2021 provides the speed you need to get the most out of your entire engineering process—maximizing your productivity while decreasing your costs.

Solid Edge Software Offer Buy 2 Get upgrade.

  • SE 388F – 02 Qty      Buy 2        Classic licenses and get upgrade to Premium Licenses
  • SE290 – 02 Qty         Buy 2        Foundation licenses and get upgrade to Classic Licenses

Solid Edge CAM at a very special price

  • SE430          Solid Edge + CAM Pro 3 Axis Milling
  • SE445          Solid Edge + CAM Pro 5 Axis Milling
  • SE440          Solid Edge + CAM Pro Total Machining

*The offer is valid until 19th March, 2021.

Click here to know more about these offers….




Call me back

Fill below form and we'll get back to you, asap.

Get a Quote